ESP-045

ESP-045

Key Features:

  1. Hydrostatic Transmission
  2. Engine Power 76 hp @ 2200 rpm
  3. Laying Capacity 125 TPH
  4. Hopper Capacity 4.25 CM
  5. Paving Width 2.5 m to 4.5 m
  6. Weight 9,880 kg
  7. Two Wheels on Rear Axle
  8. MOBA (Germany) Make Electronic Sensor
  9. Double Operator Seat

ESP-045 Catalog

Add to Compare

Category:

Product Description

ESP-045 is a wheel mounted sensor paver finisher for those who want better performance compare to mechanical pavers at a very economical rate. ESP-045 offers ease of operating and maintaining it.

Smaller, stronger, and economical sensor paver finisher model ESP-045 comes with hydrostatic transmission, hydraulic drive for conveyor, sliding type control panel, dual operator seats, 2 nos. rear wheels, hydraulically extendable screed with vibration and heating facility, and MOBA (Germany) make sensor device.

ESP-045 has basic screed of 2.5 meters width and it is hydraulically extendable up to 4.5 meters.

There is one optional feature available for ESP-045.

  • Material Suitability
    1. Bituminous Material
    2. Bituminous, Wet Mix, GSB, DLC & DBM Material

Technical Information

Prime Mover

Kirloskar make water-cooled electric start diesel engine, Model 4R 1040TC, 76 hp @ 2200 rpm or equivalent

Power Distribution Gearbox

Coupled with engine for coupling 3 pump sets.

Material Laying Capacity

125 TPH

Material Laying Thickness

10 mm (Min) to 200 mm (Max)

Transmission

Hydrostatic

Conveyor Drive

Hydraulic

Maintenance Shutters

On three side of machine

Front Wheel

Solid Rubber Tyre
2 Nos.
550 Dia. x 175 mm width

Rear Wheel

Pneumatic Tyre
2 Nos.
Size: 12.00 x 20

Operator Panel Type

Sliding Type

Travelling Function

Left & Right side

Operating Function

Left & Right Side

Operator Seat

Double Operator Seat

Machine Steering

Hydrostatic steering for effortless operation.

Operation Controls

Using Simple Switches

Speed Reduction Gearbox

Speed reduction gearbox to achieve low speed for paving and high speed for traveling.

Gears / shaft of gear box

Made from alloy steel and are hardened and ground for efficient working.

Hopper & Feeding System

Hydraulic

Hooper Capacity

4.25 CM

Auger Screw

Dia 250 mm (10”)
Ni-Hard / High Chromium Steel Material

Battery

12 V DC

Screed width

2.5 m basic width, Hydraulically extendable upto 4.5 m

Screed Heating

Yes, with 8 LPG burner facility

Screed Crown

-1° / +4°

Screed Vibration

Yes (Fix Speed)

Slope & Grade Control

Auto & Manual mode, Electronic sensor of MOBA, Germany make

Working Speed

0 to 24 meters/min (Max.)

Travelling Speed

0 to 19 km/hr (Max.)

Capacity of Tank

Fuel : 76 L, Hydraulic Oil : 245 L

Weight

9,880 kg. (Approx.)

Hopper width

Closed : 2.440 m
Open : 3.220 m

Machinery Length

5.53 Meter

Machinery Height

Working : 3.550 m
Compact : 2.800 m

Machinery Accessories

1. Canvas Canopy
2. Working Lights
3. Traveling Lights
4. Tool Kit with Jack
5. Horn

Material Laying Suitability

Bitumin
Optional: Wetmix, DLC, DBM, GSB

Emission Standard

BS-III

Brake

Caliper disc brakes on both the side

Traction & Conveyor Pump Motor

Danfoss (Germany make) or equivalent

Screed Tamping

No (Available on request)

(Note : Specifications/description/dimensions are indicative and subject to change without notice due to modification alteration or custom engineering. Maximum parameters may not be obtained simultaneously.)