Unipave

1
2 (1)
2
3
4
5
6
Full Screen

ESP-05

Key Features:

    1. Engine Power 130hp @ 2200 rpm (BS-IV)
    2. Hydrostatic Transmission
    3. Hydraulic Conveyor & Auger Drive
    4. Adjustable Auger Height
    5. Material Laying Capacity 300 TPH
    6. Hopper Capacity 4.25 CM
    7. Paving Width 2.5 m to 5.5 m Optional: up to 6.0 meters
    8. Weight 14,470 kg
    9. Four Wheels on Rear Axle
    10. Wheels on Equalizer Beam
    11. MOBA (Germany) Make Electronic Sensors
    12. Double Operator Seats

>

ESP-05 Catalog

Category:

Add to Compare

ESP-05 is indigenously developed and the first wheel mounted hydrostatic paver finisher manufactured by UNIPAVE. ESP-05 has been gradually revived and upgraded looking over customer’s requirements.
ESP-05 has combination of features like hydrostatic transmission, hydraulic drive for conveyor, 4 nos. rear wheels on equalizer beam, sliding type control panel, dual operator seats, hydraulically extendable screed with tamping, vibration and heating facility, and MOBA (Germany) make sensor device for automatic slope & grade control.

The latest ESP-05 model comes with a CEV-IV compliant BS-IV standard engine. Also, the overall design of the machine is improved, making it more sturdy and maintenance-free. ESP-05 is now also equipped with adjustable auger height in the variation of 6 inches.

In ESP-05’s Equalizer Beam feature, the two pairs of wheels are connected with the chassis by means of a pivoted joint, which allows the wheel pair to oscillate independent of each other and the wheels do not loose contact with ground when the surface is uneven. The Equalizer Beam feature averages the unevenness of the ground and provides better finish while paving. It also distributes loads on all the wheels which provides better grip on the ground.

ESP-05 has basic screed width of 2.5 meters and it is hydraulically extendable up to 4.5 meters and it can be further extended through bolt on extension up to 5.5 meters or 6.0 meters.

Material Suitability: Bituminous, Wet Mix, GSB, DLC & DBM Materials.

Prime Mover

Ashok Leyland make water-cooled electric start diesel engine, 130 hp @ 2200 rpm or equivalent (BS-IV standard)

Power Distribution Gearbox

Coupled with engine for coupling 3 pump sets.

Material Laying Capacity

300 TPH

Material Laying Thickness

10 mm (Min) to 300 mm (Max)

Transmission

Hydrostatic

Conveyor Drive

Hydraulic, Combined

Maintenance Shutters

On three sides of machine

Front Wheel

Solid Rubber Tyre
4 Nos.
550 Dia. x 300 mm width

Rear Wheel

Pneumatic Tyre
4 Nos.
Size: 10.00 x 20

Operator Panel Type

Sliding Type

Travelling Function

Left & Right side

Operating Function

Left & Right Side

Operator Seat

Double Operator Seat

Machine Steering

Hydrostatic steering for effortless operation.

Operation Controls

Using Simple Switches

Speed Reduction Gearbox

Speed reduction gearbox to achieve low speed for paving and high speed for traveling.

Gears / shaft of gear box

Made from alloy steel and are hardened and ground for efficient working.

Hopper & Feeding System

Hydraulic

Hooper Capacity

4.25 CM

Auger Screw

Dia 350 mm

Battery

12 V DC

Screed width

2.5 m basic width, Hydraulically extendable up to 4.5 m, further bolt on extension up to 5.5 m.Optional: up to 6.0 meter attachment

Screed Heating

Yes, with 8 LPG burner facility

Screed Crown

-1° / +4°

Screed Vibration

Yes, infinitely variable upto
50.00 Hz (Max.)

Screed Tamping

Yes, infinitely variable
33.33 Hz (Max.)

Slope & Grade Control

Auto & Manual mode, Electronic sensor of MOBA, Germany make

Working Speed

0 to 30 meters/min Max

Travelling Speed

0 to 16 km/hr Max

Capacity of Tank

Fuel: 142 L
Hydraulic Oil: 231 L

Weight

14,470 kg.

DIMENSIONS

Operating Height: 3.21 m (10’ 7" )
Shipping Height (w/o canopy & exhaust): 2.41 m (7’ 1 1”)
Shipping Width: 2.66 m (8’ 9 ”)
Length (Tractor unit + screed ): 6.68 m (21’ 11 ”)

Machinery Accessories

1. Canvas Canopy
2. Working Lights
3. Traveling Lights
4. Tool Kit with Jack
5. Horn

Material Laying Suitability

For paving Asphalt (BM, DBM, BC, AC),Wet Mix Macadam (WMM) and Dry LeanConcrete (DLC) materials

Emission Standard

BS-IV

Brake

Caliper disc brakes on both the side, Hand brake also available

Traction & Conveyor Pump-Motor

Danfoss (Germany make) or equivalent

Scroll to Top