ASP-075

ASP-075

Key Features:

  1. Hydrostatic Transmission
  2. Engine Power 150 hp
  3. Laying Capacity 400 TPH
  4. Hopper Capacity 6.0 CM
  5. Paving Width 3.0 m to 7.5 m
  6. Four Wheels on Rear Axle
  7. MOBA (Germany) Make Electronic Sensor
  8. Double Operator Seat

ASP-075 Catalog

Add to Compare

Category:

Product Description

ASP-075 is a wheel mounted sensor paver finisher and it comes with hydrostatic transmission, hydraulic drive for conveyor, 4 nos. rear wheels on equalizer beam, sliding type control panel, dual operator seats, hydraulically extendable screed with tamping, vibration and heating facility, MOBA (Germany) make sensor device for automatic slope & grade control and Sonic Sensor system for automatic material flow control.

In ASP-075’s Equalizer Beam feature, the two pairs of wheels are connected with the chassis by means of a pivoted joint, which allows the wheel pair to oscillate independent of each other and the wheels do not loose contact with ground when the surface is uneven. The Equalizer Beam feature averages the unevenness of the ground and provides better finish while paving. It also distributes loads on all the wheels which provides better grip on the ground.

ASP-075 has basic screed width of 3.0 meters and it is hydraulically extendable up to 5.5 meters and it can be further extended through bolt on extension up to 7.5 meters.

Technical Information

Prime Mover

Kirloskar make water cooled electric start diesel engine model 6R 1080 TA, 150 hp @ 2000 rpm or equivalent

Power Distribution Gearbox

Coupled with engine for coupling 3 pump sets.

Material Laying Capacity

400 TPH

Material Laying Thickness

10 mm (Min) to 300 mm (Max)

Transmission

Hydrostatic

Conveyor Drive

Hydraulic (Sonic sensor system MOBA Germany make for automatic material flow control)

Maintenance Shutters

On three sides of machine

Front Wheel

Solid Rubber Tyre
4 Nos.
550 Dia. x 275 mm width

Rear Wheel

Pneumatic Tyre, 4 Nos., Size: 12.00 x 20 – 16 ply.

Operator Panel Type

Sliding

Travelling Function

Left & Right side

Operating Function

Left & Right side

Operator Seat

Double operator seats

Machine Steering

Hydrostatic steering for effortless operation.

Operation Controls

Using Simple Switches

Speed Reduction Gearbox

Speed reduction gearbox to achieve low speed for paving and high speed for traveling.

Gears / shaft of gear box

Made from alloy steel and are hardened and ground for efficient working.

Hopper & Feeding System

Hydraulic

Hooper Capacity

6.0 CM

Auger Screw

Dia 350 mm

Battery

12 V DC

Screed width

3.0 m basic width, Hydraulically extendable up to 5.5 m, further bolt on extension up to 7.5 m.

Screed Heating

LPG Gas Burner (Manually Operated)

Screed Crown

-1° / +4°

Screed Vibration

Yes, infinitely variable up to 50.00 Hz (Max.)

Screed Tamping

Yes, infinitely variable, 33.33 Hz (Max.)

Slope & Grade Control

Auto & Manual mode, Electronic sensor of MOBA, Germany make

Working Speed

0 to 30 meters/min Max

Travelling Speed

0 to 16 km/hr Max

Capacity of Tank

Fuel: 165 L
Hydraulic Oil: 275 L

Weight

16,000 kg (approx.)

Hopper width

Closed : 2.50 m (Approx), Open : 3.20 m (Approx)

Machinery Length

6.80 Meter

Machinery Height

Working: 3.47 m, Compact: 2.90 m

Machinery Accessories

1. Canvas Canopy
2. Working Lights
3. Traveling Lights
4. Tool Kit with Jack
5. Horn

Material Laying Suitability

Bitumin
Optional: Wetmix, DLC, DBM, GSB

Emission Standard

BS-III

Brake

Caliper disc brakes on both the side

Traction & Conveyor Pump Motor

Danfoss (Germany make) or equivalent

(Note : Specifications/description/dimensions are indicative and subject to change without notice due to modification alteration or custom engineering. Maximum parameters may not be obtained simultaneously.)