Unipave

UWM-05-1-e1451906245402
UWM-05-1-e1451906245402
UWM-05-shadow
Full Screen

UWM-05

Key Features:

  1. Mechanical Transmission
  2. Engine Power 76 hp @ 2200 rpm
  3. Laying Capacity 150 TPH
  4. Hopper Capacity 4.25 CM
  5. Paving Width 2.5 m to 5.0 m
  6. Weight 13,200 kg
  7. Four Wheels on Rear Axle
  8. Hydraulic Conveyor Drive
  9. Double Operator Seats
  10. Supports MOBA Sensor Device
  11. Auto Limit Switch

UWM-05 Catalog

Add to Compare

UWM-05 is a mechanical paver finisher with four nos. of rear wheels. It is a unique mechanical paver finisher which can pave at a width of 5.0 meters. It has mechanical transmission, hydraulic drive for conveyor, 4 nos. rear wheels on equalizer beam, sliding type control panel, dual operator seats and hydraulically extendable screed with vibration and heating facility.

UWM-05 is specially design for laying WMM materials, 4 nos. of wheel gives excellent grip to machine so you can lay big Mattel size materials which is not possible with single excel paver machines.

In UWM-05’s Equalizer Beam feature, the two pairs of wheels are connected with the chassis by means of a pivoted joint, which allows the wheel pair to oscillate in sync with each other and the wheels do not loose contact with ground when the surface is uneven. The Equalizer Beam feature averages the unevenness of the ground and provides better finish while paving. It also distributes loads on both wheels which provides better grip on the ground.

UWM-05 has basic screed width of 2.5 meters and it is hydraulically extendable up to 4.5 meters. For further extension up to 5.0 meters, bolt on mechanical extensions are provided.

Also, UWM-05 supports MOBA (Germany) make sensor device for automatic slope and grade control.

There are two optional features available for UWM-05.

  • Material Suitability
    1. Bituminous Material
    2. Bituminous, Wet Mix, GSB, DLC & DBM Material
  • MOBA (Germany) make sensor device for automatic slope and grade control.
Prime Mover

Kirloskar make water-cooled electric start diesel engine, Model 4R 1040TC, 76 hp @ 2200 rpm or equivalent

Power Distribution Gearbox

Only for Conveyor drive

Material Laying Capacity

150 TPH

Material Laying Thickness

10 mm (Min) to 300 mm (Max)

Transmission

Mechanical

Conveyor Drive

Hydraulic

Maintenance Shutters

On three side of machine

Front Wheel

Solid Rubber Tyre, 4 Nos., 550 Dia. x 175 mm width

Rear Wheel

Pneumatic Tyre
4 Nos.
Size: 10.00 x 20

Operator Panel Type

Sliding Type

Travelling Function

Left & Right side

Operating Function

Left & Right side

Operator Seat

Double Operator Seat

Machine Steering

Hydrostatic steering for effortless operation.

Operation Controls

Mechanical

Speed Reduction Gearbox

Eight speed reduction gearbox with differential and differential lock arrangement.

Gears / shaft of gear box

Made from alloy steel and are hardened and ground for efficient working.

Hopper & Feeding System

Hydraulic

Hooper Capacity

4.25 CM

Auger Screw

Dia 350 mm

Battery

12 V DC

Screed width

2.5 m basic width, Hydraulically extendable upto 4.5 m, further bolt on extension to 5.0 m

Screed Heating

Yes, with 8 LPG burner facility

Screed Crown

-1° / +4°

Screed Vibration

Yes, Fix Speed

Screed Tamping

No. Available on request.

Slope & Grade Control

Manual (Standard)
Optional: Electronic sensor of MOBA, Germany make

Working Speed

1.27 to 24 meters/min Max

Travelling Speed

16 km/hr (Max.)

Capacity of Tank

Fuel: 100 L
Hydraulic Oil: 85 L

Weight

13,200 kg. Approx

Hopper width

Closed: 2.440 m
Open: 3.220 m

Machinery Length

6.670 m
Compact: 2.900m

Machinery Height

Working: 3.470m

Machinery Accessories

1. Canvas Canopy
2. Working Lights
3. Traveling Lights
4. Tool Kit with Jack
5. Horn

Material Laying Suitability

Bitumin
Optional: Wetmix, DLC, DBM, GSB

Emission Standard

BS-III

Brake

Caliper disc brakes on both the side

Conveyor Pump-Motor

Danfoss (Germany make) or equivalent

Scroll to Top