Unipave

UNIPAVE
EBP-015 DEC
ebp 3
EBP2
ebp 5
ebp 4
ebp 7
Full Screen

EBP-015

Key Features:

  1. Engine Power 49.5 hp @ 2000 rpm (BS-III)
  2. Hydrostatic Transmission
  3. Hydraulic Conveyor & Auger Drive Separate drive
  4. Material Laying Capacity 100 TPH
  5. Hopper Capacity 2.26 CM
  6. Paving Width 1.5 m to 3.5 m
  7. Weight 7,020 kg
  8. Two Wheels on Rear Axle
  9. Single Operator Seats
  10. Slop and Grade Control by MOBA (Optional)

EBP-015 Catlogs EBP-015 CATALOG

Category:

Add to Compare

EBP-015 comes with Hydrostatic Transmission and Hydraulic Conveyor & Auger Drive. It is developed to provide better performance at low maintenance cost. It has minimum paving width of 1.5 meters and maximum paving width of 3.5 meters. The screed is infinitely hydraulically variable.

Smaller, stronger, and economical hydrostatic paver finisher model EBP-015  comes with Fix type control panel, hydraulically extendable screed with vibration and heating facility and hydraulically operated hopper wings. All the functions are easily controlled from the main control panel, also there are two fix consoles on the screed, one on each side of the screed, to adjust the screed by the operator standing on the screed.

EBP-015’s hydraulic conveyor & auger drive increases output and reduces maintenance. Auto Limit Control Switch helps to control material flow automatically. both drive are control separated.

The EBP-015 is also able to synchronise with MOBA Sensor device for slop and grade control.

Material Suitability: Bituminous, Wet Mix, DLC & DBM Materials

Power Distribution Gearbox

Yes
Material Laying Capacity

100 TPH
Material Laying Thickness

10 mm (Min) to 200 mm (Max)
Transmission

Hydrostatic
Conveyor Drive

Hydraulic
Maintenance Shutters

On two side of machine
Front Wheel

Solid Rubber Tyre
2 Nos.
550 Dia. x 175 mm width
Rear Wheel

Pneumatic Tyre
2 Nos.
Size: 10.00 x 20
Operator Panel Type

Fix Type
Travelling Function

Right side only
Operating Function

Right side only
Operator Seat

Single Operator Seat
Machine Steering

Hydrostatic steering for effortless operation.
Operation Controls

Mechanical Lever for Hydraulic Drive
Speed Reduction Gearbox

Speed reduction gearbox to achieve low speed for paving and high speed for traveling.
Gears / shaft of gear box

Made from alloy steel and are hardened and ground for efficient working.
Hopper & Feeding System

Hydraulic
Hooper Capacity

2.26 CM
Auger Screw

Dia 250 mm (10”)
Ni-Hard / High Chromium Steel Material
Battery

12 V DC
Screed width

1.5 m basic width, Hydraulically extendable upto 2.5 m further by bolt on extension up to 3.5 m
Screed Heating

Yes, with 4 LPG burner facility
Screed Crown

-1° / +4°
Screed Vibration

Fix Speed
Screed Tamping

No
Slope & Grade Control

Auto and Manual mode
Auto with MOBA make Electronic Sensor (Optional)
Working Speed

0 to 24 meters/min Max
Travelling Speed

16 km/hr (Max.)
Capacity of Tank

Fuel: 58 L
Hydraulic Oil: 85 L
Weight

7,020 kg. approx
Dimensions

Operating Height: 3.35 m (10’ 12”)
Shipping Height (w/o canopy & exhaust):2.5 m (8’ 3”)
Shipping Width: 1.67 m (5’ 6”)
Length (Tractor unit + screed): 5.2 m (17’ 1”)
Wheel Base: 2.10 m (6' 11")
Dump Height: 0.48 m (1' 7")
Thrust Roller Height: 0.42 m ( 1' 5")
Machinery Accessories

1. Canvas Canopy
2. Working Lights
3. Traveling Lights
4. Tool Kit with Jack
5. Horn
Material Laying Suitability

Bituminous, Wet Mix, DLC & DBM Materials
Emission Standard

BS-III
Brake

Caliper disc brakes on both the side, Hand brake also available
Conveyor Pump-Motor

Danfoss (Germany make) or equivalent

Related products

Scroll to Top